Description
Front and rear brake pads and rotors kit for the Acura ILX 2013-2015. Type 03 HydroAdaptive ceramic pads paired with SC rotors with a coated hub and edges: four rotors and both pad sets, covering all four wheels.
Made for everyday driving in rain and humidity. The pads and rotors are matched to work as one braking system: the pads move water away from the braking surface, and the rotor surface is prepared for them, so braking stays consistent in wet weather. The coated hub and edges resist rust on the parts of the rotor the pads don’t touch.
Fits Acura ILX models from 2013 to 2015. Use Verify Fitment above to confirm your exact trim. Free shipping to all 10 provinces.
Buyers Guide
Find Your partsLoading fitment data...
Application Summary
Summary only. Use Verify Fitment or check the Buyer's Guide above for detailed fitment confirmation.
Frequently asked questions
Will this kit fit my car?
The Additional information tab lists the make, model and years this kit fits. To check your exact vehicle, use Verify Fitment under the product title. If a part bought with verified fitment doesn't fit, we send a free return label and a full refund.
What's in this kit?
A set of AAA Frictions ceramic brake pads and matching rotors for the axle in the title: front, rear or front and rear. The Additional information tab shows the pad type and the rotor coating.
How does this kit perform in rain, snow and salt?
The pads move water away from the braking surface to keep their bite in rain and slush, and the rotor surface is prepared for them, so braking stays consistent. GEOMET-coated GC rotors also resist the salt rust that causes uneven braking. This kit's pad type and rotor coating are in the Additional information tab.
Should I choose Type 03 or Type 07?
Type 03 HydroAdaptive pads suit everyday driving in rain and humidity. Type 07 HydroAdaptive+ pads add better performance on cold starts and in snow and slush. If you face long, salty winters, choose a Type 07 kit, ideally with fully GEOMET-coated GC rotors.
Does this kit cover both wheels?
Yes. A front or rear kit covers both wheels on that axle: two rotors and a set of pads. A front-and-rear kit covers all four wheels.
Do new pads and rotors need a break-in?
Yes, a normal bed-in: a series of moderate stops so the pads lay an even layer on the new rotors. Avoid hard stops for the first few hundred kilometres. Our coated rotor break-in guide has the steps.
How long does shipping take?
Shipping is free to all 10 provinces. Orders usually ship within a day and arrive 1 to 5 days later.
What is your return policy?
You have 30 days to return parts that are unused and in their original packaging. If a part bought with verified fitment doesn't fit, we send a free return label and a full refund. Read the full refund and returns policy.
Reviews: Type 03 SC front and rear kits
- Jason F.November 2, 2026
Price was amazing, shipping was really fast. I've had them installed a month or so and everything has been perfect.
- Kyle W.November 1, 2026
Fit well. Use all parts for these. I tried to get away with not using the anti vibrating clips, but you will definitely hear it if not installed.
All reviews come from verified buyers, through a private link sent after their order.
Why Conventional Brakes Lose Confidence in the Rain
Most aftermarket brake systems are engineered around dry, controlled test conditions. Real roads are different.
When rain falls or humidity rises, moisture forms a thin film between the brake pad and rotor surface. Conventional ceramic pads allow water to linger at the friction interface. This reduces surface contact, lowers friction output, and delays bite response.
- Drivers experience this as:
- A softer initial pedal feel
- Slight delay before braking “grabs”
- Inconsistent stopping performance during heavy rain
- Variable pedal response as humidity shifts
Traditional pads were built to handle heat. They were never engineered to manage moisture.
AAA Frictions was built to solve this overlooked problem
HydroAdaptive™ Environmental Braking
Type 03 Brake Pads are built around our HydroAdaptive™ Formulation — a ceramic friction system engineered specifically to manage moisture and humidity instability.
Instead of allowing water to remain trapped at the contact zone, HydroAdaptive™ guides moisture away from the braking surface and stabilizes friction behavior when environmental conditions change.
What That Means in Real Driving
- Stable bite during heavy rainfall
- Consistent pedal feel in humid climates
- Predictable torque delivery from the first stop
- Smooth braking through seasonal transitions
Type 03 does not chase aggressive bite. It delivers controlled, repeatable stopping power in the environments most drivers face daily.
This is braking engineered for rain heavy and humid regions.
Why This Is a System — Not Just Pads
Braking consistency does not come from one component alone.
The SC Rotors included in this kit are engineered to work in harmony with HydroAdaptive™ pads at the system level
Semi-Coated and Matched for Friction Stability
SC Rotors are not generic castings.
They are:
- Semi-coated for corrosion resistance
- Surface tuned to complement HydroAdaptive pad behavior
- Engineered to promote faster transfer layer stabilization
- Designed to shorten break-in distance
When paired together, pad and rotor stabilize more quickly, improving early-stage consistency and long-term friction balance.
The rotor completes the friction system.
What’s Included in This Kit
This complete braking system includes:
- Type 03 HydroAdaptive™ Brake Pads
- SC Semi-Coated Rotors
- Vehicle-specific hardware kits where applicable
- HydroAdaptive Reserved Brake Grease
About the HydroAdaptive Reserved Brake Grease
This is not generic assembly grease.
It is reserved specifically for HydroAdaptive brake pad systems and engineered to:
- Remain stable across wide temperature ranges
- Resist washout during rain and humidity
- Maintain lubrication consistency in real-world conditions
Every component in this kit is selected to support environmental braking stability.
Ideal For
Type 03 + SC Kit is ideal for:
- Rain-heavy climates
- Coastal and humid regions
- Daily commuters facing unpredictable weather
- Drivers prioritizing smooth, consistent braking feel
If your primary challenge is wet roads and humidity shifts, Type 03 is purpose-built for your environment
Designed for Real Roads, Not Marketing Claims
AAA Frictions exists because traditional aftermarket brakes stopped evolving .
We engineer for:
- Moisture management
- Humidity stability
- Everyday temperature transitions
- Predictable braking response
Not for exaggerated performance claims. When weather changes, braking should not.
AAA Frictions
When you install this kit, you install a climate-focused braking system designed for environmental consistency.
Anytime. Any Weather. Anywhere.
Additional information
| make | Acura |
|---|---|
| model | ILX |
| years | 2013, 2014, 2015 |
| pad_material | HydroAdaptive |
| rotor_material | Semi Coated |
| Tier | C |