Description
Front and rear brake pads and rotors kit for the Acura MDX 2001-2002. Type 03 HydroAdaptive ceramic pads paired with fully GEOMET-coated GC rotors: four rotors and both pad sets, covering all four wheels.
Made for everyday driving in rain and humidity. The pads and rotors are matched to work as one braking system: the pads move water away from the braking surface, and the rotor surface is prepared for them, so braking stays consistent in wet weather. The GEOMET coating protects the rotor hub and edges from the salt rust that causes uneven braking.
Fits the 2001 and 2002 Acura MDX. Use Verify Fitment above to confirm your exact trim. Free shipping to all 10 provinces.
Buyers Guide
Find Your partsLoading fitment data...
Application Summary
Summary only. Use Verify Fitment or check the Buyer's Guide above for detailed fitment confirmation.
Frequently asked questions
Will this kit fit my car?
The Additional information tab lists the make, model and years this kit fits. To check your exact vehicle, use Verify Fitment under the product title. If a part bought with verified fitment doesn't fit, we send a free return label and a full refund.
What's in this kit?
A set of AAA Frictions ceramic brake pads and matching rotors for the axle in the title: front, rear or front and rear. The Additional information tab shows the pad type and the rotor coating.
How does this kit perform in rain, snow and salt?
The pads move water away from the braking surface to keep their bite in rain and slush, and the rotor surface is prepared for them, so braking stays consistent. GEOMET-coated GC rotors also resist the salt rust that causes uneven braking. This kit's pad type and rotor coating are in the Additional information tab.
Should I choose Type 03 or Type 07?
Type 03 HydroAdaptive pads suit everyday driving in rain and humidity. Type 07 HydroAdaptive+ pads add better performance on cold starts and in snow and slush. If you face long, salty winters, choose a Type 07 kit, ideally with fully GEOMET-coated GC rotors.
Does this kit cover both wheels?
Yes. A front or rear kit covers both wheels on that axle: two rotors and a set of pads. A front-and-rear kit covers all four wheels.
Do new pads and rotors need a break-in?
Yes, a normal bed-in: a series of moderate stops so the pads lay an even layer on the new rotors. Avoid hard stops for the first few hundred kilometres. Our coated rotor break-in guide has the steps.
How long does shipping take?
Shipping is free to all 10 provinces. Orders usually ship within a day and arrive 1 to 5 days later.
What is your return policy?
You have 30 days to return parts that are unused and in their original packaging. If a part bought with verified fitment doesn't fit, we send a free return label and a full refund. Read the full refund and returns policy.
Rain, Humidity, and Corrosion Work Together
Rain and humidity reduce friction.
Long-term exposure to moisture, road salt, and road grime reduces it further.
When water collects between the pad and the rotor, it forms a thin film that acts as a temporary friction barrier. The first stop in the rain becomes softer and less predictable.
At the same time:
Humidity changes the surface behavior of conventional ceramic compounds
Moisture and road salt accelerate corrosion across rotor surfaces
When corrosion develops:
Rotor surfaces degrade unevenly
Pad contact becomes less consistent
Friction behavior changes over time
Drivers experience:
- Delayed initial bite in heavy rain
- Inconsistent pedal feel as humidity shifts
- Longer stopping distances on wet roads
- Gradual loss of smoothness due to corrosion exposure
Traditional brake systems were never engineered to manage moisture and corrosion together.
HydroAdaptive™ Environmental Braking
Type 03 Brake Pads are built around HydroAdaptive™ — a ceramic friction system engineered to
stabilize braking in wet and humid environments.
HydroAdaptive™ actively manages moisture at the friction interface, guiding water away from the
contact zone so pad-to-rotor engagement stays consistent when conditions change.
What This Delivers:
- Stable bite during rain and on water-covered roads
- Consistent pedal feel in humid climates
- Predictable torque from the first stop, without waiting for heat buildup
- Reduced temporary slip in wet braking
- Smooth braking through daily weather changes
Type 03 is engineered for controlled, repeatable braking in rain-heavy and humid regions — not aggressive,
inconsistent bite.
Why This Is a System — Not Just Pads
Braking consistency depends on how pad and rotor function together as a complete system.
GC Rotors: Full Protection + Friction Stability
GC Type Rotors are fully coated with GEOMET® and engineered to pair precisely with HydroAdaptive™ formulations.
What this adds to the system:
- Full GEOMET® coating protects against corrosion from water, humidity, and road salt
- HydroAdaptive-matched metallurgy ensures stable friction behavior
- Controlled surface preparation improves pad contact consistency
- Faster bedding and reduced uneven wear
- Maintains braking performance through long-term moisture exposure
Where SC rotors support friction behavior, GC rotors extend that performance through
corrosion-prone conditions.
This is not a collection of parts.
It is a braking system engineered for environmental durability.
WHAT’S INCLUDED
- Type 03 HydroAdaptive™ Brake Pads
- GC Type Fully Coated Rotors (GEOMET®)
- Vehicle-specific hardware kits where applicable
- HydroAdaptive Reserved Brake Grease
HydroAdaptive Reserved Brake Grease
Engineered specifically for HydroAdaptive systems:
- Maintains stability across temperature changes
- Resists washout from rain and humidity
- Preserves lubrication integrity over time
Every component is selected to support consistent braking in real-world environments
Ideal For
Type 03 + GC Kit is ideal for:
- Rain-heavy regions
- High humidity environments
- Areas with road salt usage
- Coastal climates
- Daily drivers exposed to year-round moisture
Positioning Insight
| Environment | Type 03 | Type 07 |
|---|---|---|
| Heavy Rain | ✔ | ✔ |
| High Humidity | ✔ | ✔ |
| Snow & Ice | Moderate | Optimized |
| Freezing Temps | Improved | Enhanced |
| Corrosion / Salt Exposure | Optimized | Optimized + Extended |
If your driving conditions include frequent rain, high humidity, and long-term exposure to corrosive elements, this is the correct system
Built for Real Environments — Not Ideal Conditions
Most brake systems are designed to perform when new and dry. Real roads are different.
Real roads are: Wet, Humid, Corrosive and Unpredictable
HydroAdaptive™ ensures friction stability in the moment. GC Rotors ensure that stability is maintained over time. Consistency is not a feature. It is a system.
Additional information
| make | Acura |
|---|---|
| model | MDX |
| years | 2001, 2002 |
| pad_material | HydroAdaptive Ceramic |
| rotor_material | GEOMET Fully Coated |
| Tier | C |